ZIRO PLA PRO Basic Color Series Filament 1.75mm, Gray

Equipment and settings used used
Bambu Labs P1S
.20 standard
100% speed
Bambu PLA standard had to switch to Bambu PLA Matte standard
3 wall 15% infill gyroid
Sunlu quad filament dryer set to TPU
Glue stick

4 years printing experience on multiple printers

Had some issues in the beginning dialing it in. First it didn't want to stick to the bed. So out comes the glue stick. The layer adhesion. So up the temp then boom. Ran like a champ. No issues. So beginner level, no. But as I try some of these cheaper brands because economy and stuff. The more experience you need dialing them in. The material is not trash by any means. You just might need to do a little fin tuning in the beginning.

Received nothing but consistent and quality prints from this filament.

I bought the gray filament a few months ago and have used it since then. Well, I just finished yet another print with this stuff and was like "I need to write a positive review, this stuff rules." I love this stuff. It's accurate, tough, and beautiful. I've noticed that when it comes to flexural strength, it performs better than any other PLA that I've used. Of all the different spools of PLA I own, this is my go-to roll for printing small yet strong gears because they come out super strong (for PLA), and they mesh together well. I will be trying their other colors as well in the near future.

Usually I use ESun PLA+ but this filament was recommended to me by a friend and I couldnt be any happier with it!

It sticks to my bed with no brim with zero issues, no knots in the spool, and so far no clogs!

Ive done multiple 20+ hour prints on it with no issues! Will definitely be ordering more of it

have used 4 1kg reels of this filament now with absolutely no issues until today...................
filament jammed into the bowden tube. after a struggle I got it out and the 2 pictures speak for themselves. 2.03mm trying to squeeze its way through is not going to happen! SEVEN HOURS of printing wasted!!!!